This HighReynoldsNumberWindTurbineWakeDataset_2022_README.txt file was generated on 2022-06-14 by Alexander Piqué


GENERAL INFORMATION

1. Title of Dataset: High Reynolds Number Wind Turbine Wake Data

2. Author Information
	A. Principal Investigator Contact Information
		Name: Alexander Piqué
		Institution: Princeton University
		Address: Princeton NJ, 08540
		Email: apique@princeton.edu	

	B. Associate or Co-investigator Contact Information
		Name: Marcus Hultmark
		Institution: Princeton University	
		Address: Princeton NJ, 08540
		Email: hultmark@princeton.edu


3. Date of data collection (single date, range, approximate date): 
Start: 2019-06-01 End: 2019-07-01
4. Geographic location of data collection: 
Princeton, NJ, USA
5. Information about funding sources that supported the collection of the data: 
The work was supported by the National Science Foundation under Grant No. CBET 1652583

SHARING/ACCESS INFORMATION

1. Links to publications that cite or use the data: The data is first cited in https://doi.org/10.1007/s00348-022-03455-0

2. Recommended citation for this dataset: 
Piqué A., Miller M. A., Hultmark M. (2022). High Reynolds Number Wind Turbine Wake Data. DataSpace. https://doi.org/10.34770/1eyw-6f98

DATA & FILE OVERVIEW

1. File List: 
Fig1-8_10.csv-->Data needed for plots 1-8 and 10 of the article
Fig9a-Phi.csv-->Data needed for the x-mesh of plot 9a
Fig9a-rD.csv-->Data needed for the y-mesh of plot 9a
Fig9a-Uu0.csv-->Data needed for the z-mesh of plot 9a
Fig9b-Phi.csv-->Data needed for the x-mesh of plot 9b
Fig9b-rD.csv-->Data needed for the y-mesh of plot 9b
Fig9b-Uu0.csv-->Data needed for the z-mesh of plot 9b
turbine_tower_asm.stp-->STEP file of the turbine tower and turbine assembly

2. Relationship between files, if important: 
Fig9a-Phi.csv, Fig9a-rD.csv, Fig9a-Uu0.csv are needed to fully create plot 9a
Fig9b-Phi.csv, Fig9b-rD.csv, Fig9b-Uu0.csv are needed to fully create plot 9b

3. Are there multiple versions of the dataset? No


METHODOLOGICAL INFORMATION

1. Description of methods used for collection/generation of data: 
Data collection was fully described in https://doi.org/10.1007/s00348-022-03455-0 (the work associated with the recommended citation for this dataset).

2. Methods for processing the data: 
Data was
3. Instrument- or software-specific information needed to interpret the data: 
No packages are needed to process the software. Software that can open CSV files (such as Excel) are required to open the CSV files. A CAD software is needed to open the STEP files.

4. Standards and calibration information, if appropriate: 
No standards or calibration data is needed
5. Environmental/experimental conditions: 
Data was acquired within a high pressure wind tunnel facility. Experimental conditions, specifically Reynolds numbers, are listed in the CSV files. All experimental conditions are listed in https://doi.org/10.1007/s00348-022-03455-0
6. Describe any quality-assurance procedures performed on the data: 
Not applicable for this dataset
7. People involved with sample collection, processing, analysis and/or submission: 
Alexander Piqué

DATA-SPECIFIC INFORMATION FOR: Fig1-8_10.csv

1. Number of variables: 
9
2. Number of cases/rows: 
108
3. Variable List: 
(Ue-U)/Ue-->Deficit velocity nondimensionalized by the freestream velocity at the specified downstream location (Ue)
z/D-->Spanwise position nondimensionalized by turbine diameter (D)
u'^2/Ue^2-->Axial variance nondimensionalized by Ue
x/D-->Spanwise position nondimensionalized by D
z/l0-->Spanwise position nondimensionalized by the half-width (l0)
(Ue-U)/u0-->Deficit velocity nondimensionalized by the deficit velocity (u0)
u'^2/u0^2-->Axial variance nondimensionalized by u0
P-->Tunnel static pressure (Units=MPa)
ReD-->Reynolds number of experiment

DATA-SPECIFIC INFORMATION FOR: Fig9a-Phi.csv

1. Number of variables: 
1
2. Number of cases/rows: 
81
3. Variable List: 
Phi-->Phase angle out of 2pi. The data is presented as a mesh. Must use with the other Fig9a files to recreate Fig9a.

DATA-SPECIFIC INFORMATION FOR: Fig9a-rD.csv

1. Number of variables: 
1
2. Number of cases/rows: 
81
3. Variable List: 
z/D-->Nondimensionalized spanwise position. The data is presented as a mesh. Must use with the other Fig9a files to recreate Fig9a.

DATA-SPECIFIC INFORMATION FOR: Fig9a-Uu0.csv

1. Number of variables: 
1
2. Number of cases/rows: 
81
3. Variable List: 
U/u0-->Wake velocity nondimensionalized by u0. The data is presented as a mesh. Must use with the other Fig9a files to recreate Fig9a.

DATA-SPECIFIC INFORMATION FOR: Fig9b-Phi.csv

1. Number of variables: 
1
2. Number of cases/rows: 
81
3. Variable List: 
Phi-->Phase angle out of 2pi. The data is presented as a mesh. Must use with the other Fig9b files to recreate Fig9b.

DATA-SPECIFIC INFORMATION FOR: Fig9b-rD.csv

1. Number of variables: 
1
2. Number of cases/rows: 
81
3. Variable List: 
z/D-->Nondimensionalized spanwise position. The data is presented as a mesh. Must use with the other Fig9b files to recreate Fig9b.

DATA-SPECIFIC INFORMATION FOR: Fig9b-Uu0.csv

1. Number of variables: 
1
2. Number of cases/rows: 
81
3. Variable List: 
U/u0-->Wake velocity nondimensionalized by u0. The data is presented as a mesh. Must use with the other Fig9b files to recreate Fig9b.